Measuring Absolute Coronary Flow and Microvascular Resistance by Thermodilution: JACC Review Topic of the Week.

Diagnosing coronary microvascular dysfunction remains challenging, primarily due to the lack of direct measurements of absolute coronary blood flow (Q) and microvascular resistance (Rµ). However, there has been recent progress with the development and validation of continuous intracoronary thermodilution, which offers a simplified and validated approach for clinical use. This technique enables direct quantification of Q and Rµ, leading to precise and accurate evaluation of the coronary microcirculation. To ensure consistent and reliable results, it is crucial to follow a standardized protocol when performing continuous intracoronary thermodilution measurements. This document aims to summarize the principles of thermodilution-derived absolute coronary flow measurements and propose a standardized method for conducting these assessments. The proposed standardization serves as a guide to ensure the best practice of the method, enhancing the clinical assessment of the coronary microcirculation.

Validation of a novel numerical model to predict regionalized blood flow in the coronary arteries.

Aims: Ischaemic heart disease results from insufficient coronary blood flow. Direct measurement of absolute flow (mL/min) is feasible, but has not entered routine clinical practice in most catheterization laboratories. Interventional cardiologists, therefore, rely on surrogate markers of flow. Recently, we described a computational fluid dynamics (CFD) method for predicting flow that differentiates inlet, side branch, and outlet flows during angiography. In the current study, we evaluate a new method that regionalizes flow along the length of the artery. Methods and results: Three-dimensional coronary anatomy was reconstructed from angiograms from 20 patients with chronic coronary syndrome. All flows were computed using CFD by applying the pressure gradient to the reconstructed geometry. Side branch flow was modelled as a porous wall boundary. Side branch flow magnitude was based on morphometric scaling laws with two models: a homogeneous model with flow loss along the entire arterial length; and a regionalized model with flow proportional to local taper. Flow results were validated against invasive measurements of flow by continuous infusion thermodilution (Coroventis™, Abbott). Both methods quantified flow relative to the invasive measures: homogeneous (r 0.47, P 0.006; zero bias; 95% CI -168 to +168 mL/min); regionalized method (r 0.43, P 0.013; zero bias; 95% CI -175 to +175 mL/min). Conclusion: During angiography and pressure wire assessment, coronary flow can now be regionalized and differentiated at the inlet, outlet, and side branches. The effect of epicardial disease on agreement suggests the model may be best targeted at cases with a stenosis close to side branches.

Changes in absolute flow, myocardial resistance and FFR after chronic total occlusion percutaneous coronary intervention.

BACKGROUND: Randomised studies of percutaneous coronary intervention (PCI) in patients with chronic total occlusion (CTO) have shown inconsistent outcomes, suggesting incomplete understanding of this cohort and their coronary physiology. To address this shortcoming, we designed a prospective observational study to measure the recovery of absolute coronary blood flow following successful CTO PCI Aims: We sought to identify patient and procedural characteristics associated with a favourable physiological outcome after CTO PCI. METHODS: Consecutive patients with a CTO subtending viable myocardium underwent PCI utilising contemporary techniques and the hybrid algorithm. Immediately after PCI, and at 3-month follow-up, physiological measurements were performed utilising continuous thermodilution. RESULTS: A total of 81 patients were included with a mean age of 63.6±8.9 years, and 66 (81.5%) were male. Physiological measurements of absolute coronary blood flow in the CTO vessel increased by 30% (p<0.001) and microvascular resistance reduced by 16% (p<0.001) from immediately post-CTO PCI to follow-up assessment. Fractional flow reserve increased by 0.02 (p=0.015) in the same period. Prior coronary artery bypass graft (CABG) and a higher estimated glomerular filtration rate (eGFR) were associated with a larger change in absolute flow. An extraplaque strategy was associated with a smaller change in absolute flow. CONCLUSIONS: Post-CTO PCI, there is a continued augmentation in absolute coronary blood flow and reduction in microvascular resistance from baseline to follow-up at 3 months. Prior CABG and a higher baseline eGFR were predictors of a larger change in absolute coronary flow, whilst an extraplaque final wire path strategy predicted a smaller change. Lastly, the patient characteristics and comorbidities had a larger influence than procedural factors on the observed change in absolute flow.

Prognostic Value of Measuring Fractional Flow Reserve After Percutaneous Coronary Intervention in Patients With Complex Coronary Artery Disease: Insights From the FAME 3 Trial.

BACKGROUND: We evaluate the prognostic value of measuring fractional flow reserve (FFR) after percutaneous coronary intervention (post-PCI FFR) and intravascular imaging in patients undergoing PCI for 3-vessel coronary artery disease in the FAME 3 trial (Fractional Flow Reserve versus Angiography for Multivessel Evaluation). METHODS: The FAME 3 trial is a multicenter, international, randomized study comparing FFR-guided PCI with coronary artery bypass grafting in patients with multivessel coronary artery disease. PCI was not noninferior with respect to the primary end point of death, myocardial infarction, stroke, or repeat revascularization at 1 year. Post-PCI FFR data were acquired on a patient and vessel-related basis. Intravascular imaging guidance was tracked. The primary end point is a comparison of target vessel failure (TVF) defined as a composite of cardiac death, target vessel myocardial infarction, and target vessel revascularization at 1 year based on post-PCI FFR values. Cox regression with robust SEs was used for analysis. RESULTS: Of the 757 patients randomized to PCI, 461 (61%) had post-PCI FFR measurement and 11.1% had intravascular imaging performed. The median post-PCI FFR was 0.89 [IQR' 0.85-0.94]. On a vessel-level, post-PCI FFR was found to be a significant predictor of TVF univariately (hazard ratio=0.67 [95% CI' 0.48-0.93] for 0.1 unit increase, P=0.0165). On a patient-level, the single lowest post-PCI FFR value was also found to be a significant predictor of TVF univariately (hazard ratio=0.65 [95% CI' 0.48-0.89] for 0.1 unit increase, P=0.0074). Post-PCI FFR was an independent predictor of TVF in multivariable analysis adjusted for key clinical parameters. Outcomes were similar between patients who had intravascular imaging guidance and those who did not. CONCLUSIONS: Post-PCI FFR measurement was a significant predictor of TVF on a vessel and patient level and an independent predictor of outcomes in a population with complex 3-vessel coronary artery disease eligible for coronary artery bypass grafting. The limited use of intravascular imaging did not affect outcomes. REGISTRATION: URL: https://www. CLINICALTRIALS: gov; Unique identifier: NCT02100722.

Changes in coronary collateral function after successful chronic total occlusion percutaneous coronary intervention.

BACKGROUND: Contemporary chronic total occlusion (CTO) percutaneous coronary intervention (PCI) incorporates wire escalation and dissection/re-entry recanalisation strategies. AIMS: The purpose of the study was to investigate changes in collateral function after CTO PCI and to identify whether the mode of successful recanalisation influences collateral function regression. METHODS: Patients scheduled for elective CTO PCI with evidence of viability in the CTO territory by noninvasive imaging were included in this study. After successful CTO PCI, the aortic pressure (Pa) and distal coronary artery wedge pressure (Pw) during balloon occlusion were measured, both in a resting state and during infusion of intravenous adenosine, allowing the calculation of the pressure-derived collateral pressure index at rest and hyperaemia (CPIrest and the collateral fractional flow reserve [FFRcoll], respectively). Measurements were repeated 3 months later during angiographic follow-up. RESULTS: Eighty-one patients had physiological measurements at baseline and follow-up. In the final cohort the mean age was 64 years and 82% were male. The mean maximal stent diameter and total stent length were 3.2±0.5 mm and 68±31 mm, respectively. Successful strategies were antegrade wiring (64.2%), antegrade dissection re-entry (8.6%), and retrograde dissection re-entry (27.1%). Between the index procedure and follow-up, wedge pressure decreased from 34±11 mmHg to 21±8.5 mmHg (p<0.01), respectively. FFRcoll changed from 0.34±0.11 to 0.19±0.09 (p<0.01) at follow-up and CPIrest from 0.40±0.14 to 0.17±0.09 (p<0.01). Absolute maximum collateral flow decreased from 55±32 ml/min directly after PCI to 38±24 ml/min (p<0.01). There was no relation between the recanalisation technique and changes in FFRcoll. CONCLUSIONS: There was a significant reduction in collateral flow over time, independent of the recanalisation technique.

Automation of intracoronary continuous thermodilution for absolute coronary flow and microvascular resistance measurements.

AIM: Microvascular resistance reserve (MRR) as derived from continuous intracoronary thermodilution specifically quantifies microvasculature function. As originally described, the technique necessitates reinstrumentation of the artery and manual reprogramming of the infusion pump when performing resting and hyperemic measurements. To simplify and to render this procedure operator-independent, we developed a fully automated method. The aim of the present study is to validate the automated procedure against the originally described one. METHODS AND RESULTS: For the automated procedure, an infusion pump was preprogrammed to allow paired resting-hyperemic thermodilution assessment without interruption. To validate the accuracy of this new approach, 20 automated measurements were compared to those obtained in the same vessels with conventional paired resting-hyperemic thermodilution measurements (i.e., with a sensor pullback at each infusion rate and manual reprogramming of the infusion pump).  A close correlation between the conventional and the automated measuring technique was found for resting flow (Qrest : r = 0.89, mean bias = 2.52; SD = 15.47), hyperemic flow (Qhyper : r = 0.88, mean bias = -2.65; SD = 27.96), resting microvascular resistance (Rµ-rest : r = 0.90, mean bias = 52.14; SD = 228.29), hyperemic microvascular resistance Rµ-hyper : r = 0.92, mean bias = 12.95; SD = 57.80), and MRR (MRR: r = 0.89, mean bias = 0.04, SD = 0.59).  Procedural time was significantly shorter with the automated method (5'25″ ± 1'23″ vs. 4'36″ ± 0'33″, p = 0.013). CONCLUSION: Continuous intracoronary thermodilution-derived measurements of absolute flow, absolute resistance, and MRR can be fully automated. This further shortens and simplifies the procedure when performing paired resting-hyperemic measurements.

Left atrial reverse remodeling predicts long-term survival after cardiac resynchronization therapy.

BACKGROUND: Left ventricular (LV) reverse remodeling has been identified as a strong predictor of long-term survival in patients receiving CRT. Interestingly, CRT induces reverse remodeling in the left atrium (LA) as well. It is currently unknown to what extent LA reverse remodeling is correlated to long-term survival after CRT. This study aims to assess the long-term prognostic value of left atrium (LA) reverse remodeling in patients undergoing cardiac resynchronization therapy (CRT). METHODS: Baseline and 3-months follow-up echocardiograms after CRT implantation were prospectively assessed to determine changes in left ventricular end-systolic volume (LVESV), left ventricular ejection fraction (LVEF), left atrial volume (LAV), and left atrial reservoir strain (LASr). Multivariate Cox regression analysis was performed to identify predictors for long-term survival. RESULTS: In our study population of 99 patients with a mean follow-up of 6.3 ± 2.1 years, 43 patients (43%) reached the end-point of all-cause mortality. More extensive LA reverse remodeling, as measured by a relative increase in LASr, was observed in survivors compared to non-survivors (43 [29-64] % vs. 8 [2-28] %, P < 0.001, respectively). After multivariate analysis, delta LASr remained the only significant predictor of mortality [HR per 5%: 0.90 (0.86-0.95); AUC 0.78 (0.68-0.88)]. CONCLUSION: An increase in LASr is associated with favorable long-term outcome after CRT. The observed clinical importance of LA reverse remodeling after CRT asks for further validation in larger prospective cohorts.

Ultrastructural Characteristics of Myocardial Reperfusion Injury and Effect of Selective Intracoronary Hypothermia: An Observational Study in Isolated Beating Porcine Hearts.

In acute myocardial infarction (AMI), myocardial reperfusion injury may undo part of the recovery after revascularization of the occluded coronary artery. Selective intracoronary hypothermia is a novel method aimed at reducing myocardial reperfusion injury, but its presumed protective effects in AMI still await further elucidation. This proof-of-concept study assesses the potential protective effects of selective intracoronary hypothermia in an ex-vivo, isolated beating heart model of AMI. In four isolated Langendorff perfused beating pig hearts, an anterior wall myocardial infarction was created by inflating a balloon in the mid segment of the left anterior descending (LAD) artery. After one hour, two hearts were treated with selective intracoronary hypothermia followed by normal reperfusion (cooled hearts). In the other two hearts, the balloon was deflated after one hour, allowing normal reperfusion (control hearts). Biopsies for histologic and electron microscopic evaluation were taken from the myocardium at risk at different time points: before occlusion (t = BO); 5 minutes before reperfusion (t = BR); and 10 minutes after reperfusion (t = AR). Electron microscopic analysis was performed to evaluate the condition of the mitochondria. Histological analyses included evaluation of sarcomeric collapse and intramyocardial hematoma. Electron microscopic analysis revealed intact mitochondria in the hypothermia treated hearts compared to the control hearts where mitochondria were more frequently damaged. No differences in the prespecified histological parameters were observed between cooled and control hearts at t = AR. In the isolated beating porcine heart model of AMI, reperfusion was associated with additional myocardial injury beyond ischemic injury. Selective intracoronary hypothermia preserved mitochondrial integrity compared to nontreated controls.

Microvascular Resistance Reserve for Assessment of Coronary Microvascular Function: JACC Technology Corner.

The need for a quantitative and operator-independent assessment of coronary microvascular function is increasingly recognized. We propose the theoretical framework of microvascular resistance reserve (MRR) as an index specific for the microvasculature, independent of autoregulation and myocardial mass, and based on operator-independent measurements of absolute values of coronary flow and pressure. In its general form, MRR equals coronary flow reserve (CFR) divided by fractional flow reserve (FFR) corrected for driving pressures. In 30 arteries, pressure, temperature, and flow velocity measurements were obtained simultaneously at baseline (BL), during infusion of saline at 10 mL/min (rest) and 20 mL/min (hyperemia). A strong correlation was found between continuous thermodilution-derived MRR and Doppler MRR (r = 0.88; 95% confidence interval: 0.72-0.93; P < 0.001). MRR was independent from the epicardial resistance, the lower the FFR value, the greater the difference between MRR and CFR. Therefore, MRR is proposed as a specific, quantitative, and operator-independent metric to quantify coronary microvascular dysfunction.

Hypothermia for Reduction of Myocardial Reperfusion Injury in Acute Myocardial Infarction: Closing the Translational Gap.

Myocardial reperfusion injury-triggered by an inevitable inflammatory response after reperfusion-may undo a considerable part of the myocardial salvage achieved through timely percutaneous coronary intervention in patients with acute myocardial infarction. Because infarct size is strongly correlated to mortality and risk of heart failure, the importance of endeavors for cardioprotective therapies to attenuate myocardial reperfusion injury and decrease infarct size remains undisputed. Myocardial reperfusion injury is the result of several complex nonlinear phenomena, and for a therapy to be effective, it should act on multiple targets involved in this injury. In this regard, hypothermia remains a promising treatment despite a number of negative randomized controlled trials in humans with acute myocardial infarction so far. To turn the tide for hypothermia in patients with acute myocardial infarction, sophisticated solutions for important limitations of systemic hypothermia should continue to be developed. In this review, we provide a comprehensive overview of the pathophysiology and clinical expression of myocardial reperfusion injury and discuss the current status and possible future of hypothermia for cardioprotection in patients with acute myocardial infarction.

Quantification of Absolute Myocardial Flow and Resistance by Continuous Thermodilution in Patients with Ischemia and Nonobstructive Coronary Artery Disease (INOCA).

In approximately half of the patients undergoing coronary angiography for angina pectoris or for signs or symptoms suggestive of ischemic heart disease, no obstructive coronary artery disease is angiographically visible. The majority of these patients with angina or ischemia and no obstructive coronary artery disease (INOCA) have an underlying coronary vasomotor dysfunction, and current consensus documents recommend diagnostic invasive coronary vasomotor function testing (CFT). During CFT, a variety of vasomotor dysfunction endotypes can be assessed, including vasospastic coronary dysfunction (epicardial or microvascular vasospasm), and/or microvascular vasodilatory dysfunction, including impaired vasodilatory capacity and increased microvascular resistance. The quantification of the continuous thermodilution derived absolute coronary blood flow and resistance might be a better measure compared to the currently used standard physiologic measures. This article provides an overview of this continuous thermodilution method.

High microvascular resistance and reduced left atrial strain in patients with coronary microvascular dysfunction: The micro-strain study.

BACKGROUND: It is already known that high coronary microvascular resistance (Rµ) is linked to altered left ventricular stiffness and might be an early indicator of heart failure with preserved ejection fraction (HFpEF). Left atrial dysfunction, on the other hand, varies according to the grade of left ventricular diastolic dysfunction. This is the first study to use the latest development for invasive assessment of Rµ and to combine it with echocardiographic assessment of left atrial strain during reservoir phase (LASr) by speckle tracking in relation to left ventricular (LV) diastolic function. METHODS AND RESULTS: An invasive angiogram was performed in 97 patients because of suspected ANOCA. All patients underwent comprehensive echocardiography, yet image quality was poor in 15 patients leaving 82 patients to include in the final analysis. In order to compare Rµ with LASr values, patients were divided into 4 groups based upon normal values of Rµ as defined by Fournier et al. The mean LASr was plotted against the four resistance groups. The LASr was 48.6% in the lowest resistance group, and 40.1%, 36.3% and 30.1% in the low intermediate, high intermediate and high resistance group respectively. These differences were significant compared to the lowest resistance group (p < 0.05). Although higher Rµ groups showed more diastolic dysfunction, LASr was already decreased irrespective of the severity of diastolic dysfunction. CONCLUSION: This study shows a relationship between increased Rµ and reduced LASr, that seems to precede conventional measures of left ventricular diastolic dysfunction. This suggests that microvascular dysfunction might be an early indicator for the development of impaired LA function.

Coronary microvascular dysfunction assessed by continuous intracoronary thermodilution: A comparative study with index of microvascular resistance.

BACKGROUND: This study aimed to assess the correlation between the standard of care, the index of microvascular resistance (IMR) versus the novel microvascular resistance (Rmicro) and to determine the pathologic cut-off value in a selected population with suspected coronary microvascular dysfunction (CMD). METHODS: One-hundred and twenty patients with high clinical suspicion of CMD due to ischemic symptoms in the absence of significant epicardial coronary lesions were prospectively included. Following a standardized systematic protocol, coronary flow reserve, IMR, fractional flow reserve, Q and Rmicro were measured in the left anterior descending coronary artery using a temperature/pressure sensor-tipped guidewire and a dedicated infusion catheter. RESULTS: There was a high prevalence of CMD with 50 (42%) patients showing an IMR ≥ 25. Median IMR was 23 [IQR: 14-34] and median Rmicro was 464 Woods Units (WU) [IQR: 354-636WU]. ROC analyses identified 500 WU as the optimal Rmicro cut-off to identify patients with an IMR ≥ 25, with an area under the ROC curve (C statistic) of 0.83 (95% CI: 0.74 to 0.89, p < 0.0001). CONCLUSIONS: Rmicro derived from continuous intracoronary thermodilution is an accurate index to measure microvascular resistances enabling the invasive diagnostic of CMD.

Normal values of thermodilution-derived absolute coronary blood flow and microvascular resistance in humans.

BACKGROUND: Absolute hyperaemic coronary blood flow (Q, in mL/min) and resistance (R, in Wood units [WU]) can be measured invasively by continuous thermodilution. AIMS: The aim of this study was to assess normal reference values of Q and R. METHODS: In 177 arteries (69 patients: 25 controls, i.e., without identifiable coronary atherosclerosis; 44 patients with mild, non-obstructive atherosclerosis), thermodilution-derived hyperaemic Q and total, epicardial, and microvascular absolute resistances (Rtot, Repi, and Rmicro) were measured. In 20 controls and 29 patients, measurements were obtained in all three major coronary arteries, thus allowing calculations of Q and R for the whole heart. In 15 controls (41 vessels) and 25 patients (71 vessels), vessel-specific myocardial mass was derived from coronary computed tomography angiography. RESULTS: Whole heart hyperaemic Q tended to be higher in controls compared to patients (668±185 vs 582±138 mL/min, p=0.068). In the left anterior descending coronary artery (LAD), hyperaemic Q was significantly higher (293±102 mL/min versus 228±71 mL/min, p=0.004) in controls than in patients. This was driven mainly by a difference in Repi (43±23 vs 83±41 WU, p=0.048), without significant differences in Rmicro. After adjustment for vessel-specific myocardial mass, hyperaemic Q was similar in the three vascular territories (5.9±1.9, 4.9±1.7, and 5.3±2.1 mL/min/g, p=0.44, in the LAD, left circumflex and right coronary artery, respectively). CONCLUSIONS: The present report provides reference values of absolute coronary hyperaemic Q and R. Q was homogeneously distributed in the three major myocardial territories but the large ranges of observed hyperaemic values of flow and of microvascular resistance preclude their clinical use for inter-patient comparison.

Thermodilution-Based Invasive Assessment of Absolute Coronary Blood Flow and Microvascular Resistance: Quantification of Microvascular (Dys)Function?

During the last two decades, there has been a sharp increase in both interest and knowledge about the coronary microcirculation. Since these small vessels are not visible by the human eye, physiologic measurements should be used to characterize their function. The invasive methods presently used (coronary flow reserve (CFR) and index of microvascular resistance (IMR)) are operator-dependent and mandate the use of adenosine to induce hyperemia. In recent years, a new thermodilution-based method for measurement of absolute coronary blood flow and microvascular resistance has been proposed and initial procedural problems have been overcome. Presently, the technique is easy to perform using the Rayflow infusion catheter and the Coroventis software. The method is accurate, reproducible, and completely operator-independent. This method has been validated noninvasively against the current golden standard for flow assessment: Positron Emission Tomography-Computed Tomography (PET-CT). In addition, absolute flow and resistance measurements have proved to be safe, both periprocedurally and at long-term follow-up. With an increasing number of studies being performed, this method has great potential for better understanding and quantification of microvascular disease.

Computed tomographic myocardial mass compared with invasive myocardial perfusion measurement.

OBJECTIVE: The prognostic importance of a coronary stenosis depends on its functional severity and its depending myocardial mass. Functional severity can be assessed by fractional flow reserve (FFR), estimated non-invasively by a specific validated CT algorithm (FFRCT). Calculation of myocardial mass at risk by that same set of CT data (CTmass), however, has not been prospectively validated so far. The aim of the present study was to compare relative territorial-based CTmass assessment with relative flow distribution, which is closely linked to true myocardial mass. METHODS: In this exploratory study, 35 patients with (near) normal coronary arteries underwent CT scanning for computed flow-based CTmass assessment and underwent invasive myocardial perfusion measurement in all 3 major coronary arteries by continuous thermodilution. Next, the mass and flows were calculated as relative percentages of total mass and perfusion. RESULTS: The mean difference between CTmass per territory and invasively measured myocardial perfusion, both expressed as percentage of total mass and perfusion, was 5.3±6.2% for the left anterior descending territory, -2.0±7.4% for the left circumflex territory and -3.2±3.4% for the right coronary artery territory. The intraclass correlation between the two techniques was 0.90. CONCLUSIONS: Our study shows a close relationship between the relative mass of the perfusion territory calculated by the specific CT algorithm and invasively measured myocardial perfusion. As such, these data support the use of CTmass to estimate territorial myocardium-at-risk in proximal coronary arteries.